Category: News

Changelog v1.0.13:

• Removed the “fuel_flow_scalar_idle” parameter because, although it can adjust the idle fuel flow, it also disrupts the fuel flow in the mid-throttle range.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

Changelog v1.0.12:

• Adjusted the idle fuel flow.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

Daedalus BS214 is now available for purchase from the Just Flight store and will soon be released on the Flight Simulator Marketplace.

Current version: v1.0.0

In v1.0.0, to ensure compatibility with the MSFS Marketplace and future MSFS 2024 Sim Updates (SUs), we had to remove the VC-integrated EFB for MSFS 2024. This is because MSFS 2024 SimAttachments are not officially supported for MSFS 2020–native aircraft by the simulator.

Please note that the aircraft is no longer available for purchase from our website. Customers who previously purchased through our website will continue to receive support and future updates from the v0.1.x series.

Changelog v0.1.15:

• 3D Model: Animated the Oxygen Bottle Gauge.
• 3D Model: Added a feature to hide the copilot avatar in exterior views when the copilot payload is set to zero.
• Flight Model: Engine & Flight model tuning.
• Code: Fixed an issue with hPa displaying with a decimal point in the Backup Attitude instrument.
• Code: Simulated airspeed indicator failure under specific conditions.
• Code: Simulated stress and damage for the Rotax 915iS engine. For engine limitations, please refer to the manual.
  • Added engine wear gauges to the G3X Touch EIS under the INFO tab.
  • Added a switch on the right side of the panel to enable or disable engine wear.
  • Added a button on the right side of the panel to reset engine wear and extinguish an engine fire if triggered.
  • Added ENGINE FIRE warning to the G3X Touch PFD annunciations.
  • Engine wear data are stored in LVars and persist between flights.
• Code: Updated engine RPM gauges to show values rounded to multiples of 10.
• Code: Added tooltips to Circuit Breakers.
• Configuration: Adjusted the pilot camera view.
• Sound: Fixed an issue where engine sounds were muted in MSFS2024 after returning to Free Flight from the menu.

Please login to your account to download the update.

Update instructions included in the Daedalus_BS214_Changelog.txt file inside the Documentation folder.

Changelog v0.1.14:

• 3D Model: Added a tail skid to prevent tail strikes.
• Configuration: Changed the lights intensity in the MSFS2024 edition.
• Configuration: Adjusted some circuit power settings.

Please login to your account to download the update.

Update instructions included in the Daedalus_BS214_Changelog.txt file inside the Documentation folder.

Changelog v1.0.11:

• Fixed the order of the cameras instruments views.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

Changelog v0.1.13:

• Configuration: Changed default throttle values to 15% when starting on runway to prevent engine shutdowns at high-altitude airports.
• Flight Model: Fixed an issue that was preventing Pushback from working correctly in the MSFS2024 edition.

Please login to your account to download the update.

Update instructions included in the Daedalus_BS214_Changelog.txt file inside the Documentation folder.

Changelog v1.0.10:

• The calculation for the cyan fuel flow leaning marker has been fixed. It now covers the full RPM range from 2500 to 2700. From 2600 to 2700 RPM, it follows the high schedule; from 2500 to 2600 RPM, it follows the low schedule. To display a value (indicating that the aircraft is climbing), a vertical speed of more than 100 FPM is required. Please note that the marker may not disappear completely when the aircraft is not climbing—it will instead remain at the zero position.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

Changelog v1.0.9:

• Enhanced the EIS gauges for closer alignment with the real G1000® NXi.
• Added G36TN variant.
• Tornado Alley Turbo TNIO-550 – Max Manifold Pressure: 32inHg, Max Fuel Flow: 35GPH, Max TIT: 899°C, Max CHT: 238°C, Max Oil Temp: 116°C.
• Fuel Capacity increased to 120Gal (114Gal useable)
• Added TIT instrument to G36TN variant.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

Changelog v1.0.8:

• Changed the default throttle setting to 15% when starting on the runway to prevent engine shutdown at high-altitude airports.
• Added the ‘AFT DOOR’ and ‘AC DOOR EXTD’ caution annunciations on the PFD.
• Removed the CABIN HEAT, AFT CABIN HEAT and DEFROST levers.
• Removed the A/C and BLOWER switches.
• Added caps to removed levers and switches.
• Added the Pilot Window, simulating ram airflow.
• Added the Overhead Vent Outlets, simulating cool airflow.
• Added and simulated the Automatic Climate Control System (ACCS). A diagram showing the system’s buttons and functionality has been added to the documentation folder (ACCS_diagram.png). Windshield defogging is now handled via the ACCS.
• Heated air and windshield defogging are available only when engine oil temperature exceeds 40°C.
• Cooled air supply to the cabin requires engine speed above 1200 RPM.
• Added ‘CABIN TOO COLD’ and ‘CABIN TOO HOT’ advisory annunciations on the PFD (simulated only; not present in real-life aircraft), to provide temperature feedback in-sim.
• Simulated a 5 BHP power loss when the ACCS compressor is engaged. For maximum aircraft performance, the compressor can be switched off.
• Simulated the Throttle Go-Around button.
• Simulated the Throttle Limiter switch.
• Removed circuit breakers that do not exist in the real aircraft (stock aircraft seem to use circuit breaker panels from the Baron G58 rather than the Bonanza G36).
• Updated some circuit breaker labels to match the real aircraft.
• Added caps to removed circuit breakers.
• Redesigned the electrical system and simulated the circuit breakers as closely as possible to the real aircraft.
• Simulated the Yoke Pitch Trim switch.
• Simulated the Yoke Autopilot Disconnect button.
• Simulated the Yoke Control Wheel Steering (CWS) button.
• Simulated the Yoke Ident button (Transponder Ident).
• Simulated the digital Hourmeter.
• Fixed wheel chock positioning in preflight mode.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.