Posted on

Daedalus BS214 updated to v0.1.13

Changelog v0.1.13:

  • Configuration: Changed default throttle values to 15% when starting on runway to prevent engine shutdowns at high-altitude airports.
  • Flight Model: Fixed an issue that was preventing Pushback from working correctly in the MSFS2024 edition.

Please login to your account to download the update.

Update instructions included in the Daedalus_BS214_Changelog.txt file inside the Documentation folder.

Posted on

MSFS2024 Beechcraft Bonanza G36 Mod updated to v1.0.10

Changelog v1.0.10:

  • The calculation for the cyan fuel flow leaning marker has been fixed. It now covers the full RPM range from 2500 to 2700. From 2600 to 2700 RPM, it follows the high schedule; from 2500 to 2600 RPM, it follows the low schedule. To display a value (indicating that the aircraft is climbing), a vertical speed of more than 100 FPM is required. Please note that the marker may not disappear completely when the aircraft is not climbing—it will instead remain at the zero position.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

Posted on

MSFS2024 Beechcraft Bonanza G36 Mod updated to v1.0.9

Changelog v1.0.9:

  • Enhanced the EIS gauges for closer alignment with the real G1000® NXi.
  • Added G36TN variant.
  • Tornado Alley Turbo TNIO-550 – Max Manifold Pressure: 32inHg, Max Fuel Flow: 35GPH, Max TIT: 899°C, Max CHT: 238°C, Max Oil Temp: 116°C.
  • Fuel Capacity increased to 120Gal (114Gal useable)
  • Added TIT instrument to G36TN variant.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

Posted on

MSFS2024 Beechcraft Bonanza G36 Mod updated to v1.0.8

Changelog v1.0.8:

  • Changed the default throttle setting to 15% when starting on the runway to prevent engine shutdown at high-altitude airports.
  • Added the ‘AFT DOOR’ and ‘AC DOOR EXTD’ caution annunciations on the PFD.
  • Removed the CABIN HEAT, AFT CABIN HEAT and DEFROST levers.
  • Removed the A/C and BLOWER switches.
  • Added caps to removed levers and switches.
  • Added the Pilot Window, simulating ram airflow.
  • Added the Overhead Vent Outlets, simulating cool airflow.
  • Added and simulated the Automatic Climate Control System (ACCS). A diagram showing the system’s buttons and functionality has been added to the documentation folder (ACCS_diagram.png). Windshield defogging is now handled via the ACCS.
  • Heated air and windshield defogging are available only when engine oil temperature exceeds 40°C.
  • Cooled air supply to the cabin requires engine speed above 1200 RPM.
  • Added ‘CABIN TOO COLD’ and ‘CABIN TOO HOT’ advisory annunciations on the PFD (simulated only; not present in real-life aircraft), to provide temperature feedback in-sim.
  • Simulated a 5 BHP power loss when the ACCS compressor is engaged. For maximum aircraft performance, the compressor can be switched off.
  • Simulated the Throttle Go-Around button.
  • Simulated the Throttle Limiter switch.
  • Removed circuit breakers that do not exist in the real aircraft (stock aircraft seem to use circuit breaker panels from the Baron G58 rather than the Bonanza G36).
  • Updated some circuit breaker labels to match the real aircraft.
  • Added caps to removed circuit breakers.
  • Redesigned the electrical system and simulated the circuit breakers as closely as possible to the real aircraft.
  • Simulated the Yoke Pitch Trim switch.
  • Simulated the Yoke Autopilot Disconnect button.
  • Simulated the Yoke Control Wheel Steering (CWS) button.
  • Simulated the Yoke Ident button (Transponder Ident).
  • Simulated the digital Hourmeter.
  • Fixed wheel chock positioning in preflight mode.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

Posted on

Daedalus BS214 updated to v0.1.12

Changelog v0.1.12:

  • 3D Model: Fixed an issue in the MSFS2024 edition where mouse clicks could pass through the EFB screen and interact with circuit breakers behind it.

Please login to your account to download the update.

Update instructions included in the Daedalus_BS214_Changelog.txt file inside the Documentation folder.

Posted on

MSFS2024 Beechcraft Bonanza G36 Mod updated to v1.0.6

Changelog v1.0.6:

  • Improved the payload distribution in EFB.
  • Added Alternate Static Air Source.
  • Added Oxygen System. Equipped with a 115 cu. ft. oxygen bottle and an O2D2 delivery system, this setup provides sufficient oxygen for two occupants breathing at 18,000 feet for approximately 16 hours. An oxygen pressure gauge and a dedicated oxygen switch have been added to the instrument panel. The number of oxygen-consuming passengers is determined based on the aircraft payload. To be considered a passenger for oxygen planning purposes, a seat must have at least 20 kg of added weight.
  • A ‘USE OXYGEN MASKS’ advisory annunciation has been added to the PFD, triggered when flying above 12,500 feet and the oxygen system is turned off (simulated only; not present in real-life aircraft).
  • A ‘LOW OXYGEN PRESS’ caution annunciation has been added to the PFD, triggered when oxygen pressure drops below 300 PSI (simulated only; not present in real-life aircraft).
  • An Oxygen Flow sound has been added.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

Posted on

Daedalus BS214 updated to v0.1.11

Changelog v0.1.11:

  • Flight Model: Adjusted the propeller pitch moment. As a result, the required pitch trim for takeoff has changed. Please refer to the manual under the “Technical Specifications” and “Performance” sections for more details.

Please login to your account to download the update.

Update instructions included in the Daedalus_BS214_Changelog.txt file inside the Documentation folder.